● Product Features:
Ø Single component, white color.
Ø Physical form: paste
Ø Made of metallic oxide and polysiloxane
Ø Wide operating temperature range
Ø Nontoxic, non-corrosive
Ø Eco-friendly, odorless
Ø Doesn’t go dry and flowing at high temperature.
Ø High performance on insulation, damp proofing, corona resistance, electric leakage resistance and chemical resistance.
Ø Can be dispensed both by hand or machine.
Ø Heat conductivity coefficient: 1.6W/(m·K)
● Main Applications:
Ø Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.
Ø For the filling of gap between high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.
● How to Use
Ø Stir this product before using if it’s long time unused.
Ø Clean the object surfaces to get rid of oil and dirty before use.
Ø The object surfaces should be even and uniform.
Ø To dispense smoothly, please stir for 2 minutes before use.
Ø Apply a little for try before massive use.
Ø Only a thin layer of this product needed for use to avoid wastes.
Ø Do not keep this product exposed in the air for a long time.
● Technical Data
| Item |
Unit |
Typical Value |
| Item No. |
|
0112 |
| Physical Form |
|
paste |
| Color |
|
white |
| Main Component |
|
polysiloxane |
| Density |
g/cm3 |
2.7 |
| Penetration Degree |
1/10cm |
310 |
| Volatility(200℃,24h) |
% |
0.2 |
| Volume Resistivity |
Ω*cm |
1.0×1015 |
| Dielectric Strength |
KV/mm |
24 |
| Breakdown Voltage |
KV/mm |
20 |
| Surface Resistance |
Ω |
2.5×1014 |
| 0.1mm Thermal Resistance |
m2K/W |
0.00014 |
| Work Temperature |
℃ |
-50~200 |
| Heat Conductivity Coefficient |
W/(m·K) |
1.6 |
● Packing:
Ø 2kg/bucket, 6buckets/carton
● Storage:
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life is 12 months from the date of manufacture.
● Caution:
Ø Keep it away from children.
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø For the use of this product, it’s not the more the better but the thinner the better under the condition of full filling of gaps is assured.
